DIRECT IMPACT
DIRECT DRIVE
EVOLUTION BULGE
SUPRALITE
SIDEWINDER FILAMENT WOUND
PLATINUM OVERSIZE BUTT
TRIMMING
CUSTOM LOGO PROGRAM
ORDER
DCT HOME
DIRECT COMPOSITE TECHNOLOGIES
| SHAFT | IRON | IRON | IRON | WOOD | WOOD | WOOD |
| Direct Impact S/R | R | S | R | S | ||
| Direct Impact A/L | L | A | L | A | ||
| Direct Drive S/R | R | S | R | S | ||
| Direct Drive A/L | L | A | L | A | ||
| Evolution | S,R,L | S,R,L | ||||
| Supralite 968 S/R | R | S | R | S | ||
| Supralite 968 A/L | L | A | L | A | ||
| Supralite 955 S/R | R | S | R | S | ||
| Supralite 955 A/L | L | A | L | A | ||
| Sidwwinder FW | S,R,L | S,R,L | ||||
| CLUB | TIP TRIM | TIP TRIM | BUTT TRIM | TIP TRIM | TIP TRIM | BUTT TRIM |
| #1, #2 | 0 | 1 | 1 | 1 | 2 | 1 |
| 3 | .25 | 1.25 | 1 | 1.5 | 2.5 | 1 |
| 4 | .5 | 1.5 | 1 | |||
| 5 | .75 | 1.75 | 1 | 2 | 3 | 1 |
| 6 | 1 | 2 | 1 | |||
| 7 | 1.25 | 2.25 | 1 | 2.5 | 3.5 | 1 |
| 8 | 1.5 | 2.5 | 1 | |||
| 9 | 1.75 | 2.75 | 1 | |||
| PW/SW | 2 | 3 | 1 | |||
| Cut butt to length | Cut butt to length | Cut tip to length | Cut butt to length | Cut butt to length | Cut tip to length |
Platinum Shaft: For all flexes, tip trim to length only.
Special instructions for through bore and deep bore woods: For all shafts except Evolution Shaft-Tip 1/2"less than standard, butt trim to length. For Evolution shaft-butt trim 1/2; tip trim to length