Here's what folks have to say about the Kennedy Shaft puller and drill fixture

"Massive and powerful, yet gentle on ultra lite graphite. No shakes,
wobbles, or slipping. An absolutely straight pull. Quick and easy to use.
Nothing else comes close. Simply the best."
George Lafleur

"I had been using a Mitchell Shaft Puller for about 8 years and it was well
built but took much to long to install the shaft prior to pulling.
Since I have acquired Richard Kennedy's puller from you the process is much
faster and I'm sure I can expect years and years of service from it since it
is so well built and heavy enough for any job (and a boat anchor), the
clamping devise is quite good and the piece pulling against the hosel should
never ever wear out or bend. It is a piece of work built to last forever."
HStill

"I have now had several opportunities to use the shaft puller that I
purchased thru Clubmaker Online. I have three other shaft pullers that I
purchased before getting your unit. Your shaft puller is by far the easiest
to use, is the fastest to get the club into and out of and is the most heavy
duty of all of the shaft pullers that I have. As reasonable as the price
is, I would say that this puller would work well for the high volume shop to
the hobbyist. It is truly a fine product. Thanks. "
Paul Ott, Southside
Golf. Wichita, KS. PCS Class "A" Clubmaker.

"I mentioned earlier that I had received RK's shaft puller. Had my first
chance to use it this evening. The easiest removal I have ever had. Many
thanks RK!"
Mark

"I ordered one of RK's shaft pullers. It is a terrific piece of machinery.
You will not be unhappy with it!!"
Thanks,
Jim Witler

The puller WORKS! I have used it on woods and irons and have had great success. I had to do 6 Ping Eye2 irons late last week and was able to crank them out in under 10 minutes - start to finish.

You can use an adjustable wrench, but it works best if you have a ratchet with
a 15/16" socket. Be sure to crank the shaft holder w/ rubber hose tight enough
on steel shafts to get a bite.

Overall, the puller is a time and labor saver for all but the smallest of shops.

Bob Trimble
Fit You To A Tee

"the drill fixture is like the shaft puller. King Kong couldn't break it. Simple to use, works great. I can't think of a better one." George

"I was talking with Richard about which drill clamping fixture to buy from the catalog of a component supplier. As a machinist, he pointed out how none of them would be easy to use. He said he had an idea and would get back to me. About 2 weeks later I received this fixture that will survive a nuclear expolsion. It's clamped to the tray of the drill press, and placing the head in takes seconds, and it is locked in rock solid for drilling. This makes pulling the shafts and drilling the heads to parallel take about 45 minutes, tops. I'd buy another one, but this one is so simple in design and solid in construction, that it literally is never going to wear out. Thanks RK."

Steve Conlon

"I have had one of the drill Fixture for almost a year. I have used it almost every week, to ream heads, and to clean heads that I have pulled before I use the head on a new shaft. The Drill Fixture is of excellent design. The large base with the slots allow you to lock down the fixture, so that you drill very straight. It is by far the best design fixture that I have had the pleasure of using."

George Huson

ByGeorge Custom Clubs
CGA Member, PCS Member, Member of Shoptalk Forum.

"I have had and used a Mitchell heavy duty Head vise for about six years. I never looked foreward to drilling out a hosel since the head would more often than not slip in the fixture and mar the finish on the hosel. I have now used Kennedys head vise for about four months and now I actually look forward to drilling out a hosel. It has never let a head slip, it has been twice as fast to insert and lock in the head and in short it is a marvel of functional design and ease of use. It's a real confidence builder when it comes to drilling or reaming a hosel and I just know it will last longer than I will. It's the best tool in my shop."

Harold Still

Thank you Mr. Kennedy( and John !). Have had your shaft puller for aweek, admiring it. Took it out to vise this morning for initial pull..35.00 shaft with titanium head. Decided that being true to North Idaho mentality, that no sense practicing,-- RK said it would work, so just pull that mutha !. 3 minutes heating with 39.00 heating gun while setting in vice and tightening shaft, and off comes the head. Everything I own should work that easily. Thanks for quality tool !! Saved shaft for another experimental club. Now can attack the garage full of clubs lying around the shop. LB.

more praise from LB....
Just pulled second graphite shaft with new puller. 40.00 shaft..SAVED...4 minutes with heat gun, and just slides off.. Thanks again for quality tool. has now paid back 1/2 of cost with 2 saved shafts.. and get totry out 2 new clubs... diff. heads, and lengths. lb

Return to Kennedy Pullar Main Home Page