Epoxy Tips
Next time you need to mix up some epoxy for gluing, try an
empty beer or
soda can!
Break off the can's opening tab and dispose.
Turn the can over and use the concaved dome on the bottom as your
mixing
area.
The sides hold the glue in well as well as let the glue settle
to the center
of a rounced bottom,
unlike a plastic cup. It's easier to apply to your shaft and more
stable
than the small cups!
Popsicle stick work excellent for mixing as the sticks bottom
also contours
the cab dome for a thorough mix.
Another thing I always do is cut off a small piece of the glue
applicator
and let it set up in the remains of the
glue in the dome. Just a little insurance check of a good epoxy
mix and set.
Regards,
Mike Malone