Homemade Epoxy Box
Let me pass on a tip for working with epoxy, especially for
northerners. A rectangular plywood box with the ends approximately
1'x1' and the sides and bottom approximately 1'x2.5', with a top
1'x1.75' and hinged on one end would form the basis for a warming/drying
box. A wired porcelan light fixture with a 60 watt bulb afficed
to the end would provide a constant source of dry heat. This
works well to both warm the epoxy before mixing and helps to cure
the finished product. A complete set of clubs can easily fit
in. Needless to say, all of the dimensions can be customized.
Hope you can help.
Regards,
Steven Silkunas