KZ Driver/AJ TEch XUL335
I received the club and it is a beauty...almost don't want to
hit it...but I have, and I'm very satisfied
with the look, feel, control and playability. I can play it high,
low, fade or draw it. May consider a matching 3 wood in near
future. Thanks again for your courtesy and prompt response to
my order. Ciao from Naples, Italy.
D Belt
KZ Driver/3Wood AJ Tech Metal X Shaft
Today I just received clubs from Fed X. Clubs looked very beautiful,
excellent works. After office hour, I went to driving range and
hit few tray. Stunning power, much more controllable than my 975D
and shaft not as strong as I expected. I can tame it
easily.
Thanks a lot for your wonderful work.
C. Panitpichetvong
KZ Driver/Retro Shaft
Hit more balls the other day and noticed i
got 10-15 yards more carry with
the new club. Played today at one of the newer courses in hawaii
called coral creek.
drove the green on a 309 yd par 4 (strong down wind hole-20 mph).
Did not
get into any trouble off the tee. Super club so far. Very straight,
very forgiving, excellent.
Thanks again
norm
KZ Driver/CDI Lite Shaft
I really love my new driver with the Composites
Dynamics Lite shaft. It is the straightest and longest I have
ever hit. How long would it take you to put these same shafts
in my Callaway X-12 and my Orlimar 13 degree 3 wood. In short
I just love the shafts. Let me know the cost of putting the shafts
in these clubs as it would be 9 irons and 1 wood.
Bob Larison
John
I just wanted to let you know that I got the CDI
Lite shaft put in and it is awesome. It is a touch stiffer
than what i had but that eliminates the left side and I can really
let it go. I seem to be hitting it a good bit farther and just
as accurately. Thanks for your help, I will keep you updated on
any good tourney play with my new shaft
Thanks
Colby Lytch
KZ Maraging/Graman Shaft
Hey, just wanted to let you know how i came out with the maraging
steel
driver! I hit it 317yds. in the first round of qualifing in a
25mph gale.
next round I hooked 3 balls out of play . 317, 314, 313yds. qualified
to go
to nationals, theres allways next year. I really like the Graman
shaft it
has tremendous response and length. My question is can I get the
shaft in
45" xstiff ? Also, the maraging steel head you sent me has
some great
potential but it appears closed . does it come in square or open
LOOK FOWARD TO HEARING FROM YOU!!!!!! THANKS, RUSSELL
Biam maraging/tungsten/CDI Standard Shaft
Hey john -just a line to thank you for the 3 wood. Is it me or
are your offerings getting even better if that were possible?.
I love these clubs. This 3 wood (Biam Maraging/Copper/Tungsten,
CDI Standard Shaft, ed.) is a rocket. We have very wet conditions
here and it's a little early but I think I'm hitting it close
to the driver. This was a bit of a surprise since the 5 is dead
straight, great, but not super long (200 ish) The 3 seems to be
really straight and long. My driver is great too but not quite
as straight, as might be expected. Is this just a loft reason
or is their some other slight technical difference? thanks again
- keep you posted - pete
KZ Maraging Driver/Harrison
Carbine
The driver arrived on Friday, July 10 and I played it on Sunday.
I asked my wife if she could make room in our bed for the newest
love of my life.
You were correct, the Maraging head and Carbine XL shaft is a great combination. I just love it to death. I didn't hit ever ball perfectly, but even the ones not stuck well carried well. It's a great combination and I'm glad you suggested it.
I was hitting balls 30 to 40 yards longer than my average drives. Until yesterday, I considered a 240 yd drive one of the better drives of the day. Yesterday, 260 to 270 yds were the average tee shots, not the exception.
Thanks again, you've have made my day. I'm telling everyone who will listen where to find your website. I'm sure we'll be doing more business in the future.
Have a great day, and may all your shots be on target.... I know they'll be long.....
Rich Johnson
Return to Maraging Power Drivers
RE: 10.5 Maraging driver/Harrison Carbine XL Shaft combination
First round out, I hit some good, some not so good, as one might expect with a new driver. On two holes, though, I hit two clubs shorter in to the green than I ever have before! My old driver is a Mizuno T-zoid Titanium head with a 45" Grafalloy shaft, and I love it. This one is 1/2 inch longer, and maybe 20 yards stronger!
Rich Fong
I RECENTLY ASSEMBLED YOUR NINE DEGREE DRIVER HEAD WITH A GRAFALLOY PROLITE 35 46 INCH SHAFT. I AGREED WITH THE CONCEPT OF THE THINNER AND HARDER MATERIAL BUT DECIDED THAT AN EXPERIMENT WAS IN ORDER. I REALLY CANNOT SAY ENOUGH GOOD THINGS ABOUT THE RESULTS. I AM HITTING MY DRIVES AS FAR AND FURTHER THAN MY 48" TITANIUM AND SWINGING CONSIDERABLY SOFTER. THE MOST AMAZING THING ABOUT THESE HEADS IS THAT THEY SEEM TO IMPART LESS SPIN ON THE BALL ALLOWING FOR MUCH STRAIGHTER SHOTS. YOU REALLY HAVE TO TRY TO HOOK OR SLICE THESE CLUBS. I THINK THAT YOU SHOULD ADVERTISE THIS FEATURE IN YOUR MARKETING.
Return to Maraging Power Drivers
Good News on the Penley Parabolic Pro 50" and maraging
steel driver:
John,
I am gradually getting on top of my driver.My good shots are 20yds.
longer and improving.Thanks for your care.
Mike
Return to Maraging Power Drivers
I hit the driver last night after work for about 30 minutes and love the Harrison Carbine shaft. The kick point is outstanding for my swing speed. On a good solid hit the ball is still rising when it goes over the 150 target flag. I have one question. Does the Harrison Carbine shaft come in tapered version that will fit Ping Zing 2 irons or do you have to bore out the hosel to use the Carbine? I play with Zing 2's that have a JZ shaft. The shafts will need replacement in the future.
John McHenry
Return to Maraging Power Drivers
Penley 50" Tour Lite/9 degree Maraging steel driver
Am headed for Hilton Head tomorrow for a brief preview of the
course I'll be playing for the LPGA test on 10/20. Your creation
is going w/ me, and Killer is staying home. I've had some guys
try it, and they love the feel of the club - so maybe we can send
some business your way in the future. Will be giving you a report
on Big Daddy's performance on a new course later next week - but
I feel very confident w/ this driver - thank you, John!!
John,
Just wanted to let you know that I got to hit this club at the
range last week. It's a great club! It feels good when I swing
it
and is solid when I make contact. I hit it 250 yards plus. I can't
wait to get it out on the course this week. Thanks for your help
and the information that you provided for me.
Myron Shore
Return to Maraging Power Drivers
RE: Harrison LongDriver
John, The club looks great and more importantly the club hits
the ball a mile!
Thanks,